By the Lovspark Product Team · Updated November 17, 2026

Tileable textures for SketchUp, Enscape, V-Ray and D5

Free Seamless Texture Generator

Upload a close-up of stone, wood, fabric or brick and get a texture that repeats without visible seams.

Most material photos tile badly: the edges do not match and the light falls off toward one corner, so a wall or floor in your render shows a grid. Lovspark joins the edges, evens out the light and shows a tiled preview before you download a PNG. For floors, it rebuilds a plank photo as herringbone, chevron, basket weave or square tiles.

Free · Runs in your browser · No sign-up needed to try

Try the seamless texture generator

One oak floor photo rebuilt in turn as staggered planks, herringbone, chevron, basket weave and square tiles
Open the free generator

Free · Runs in your browser · No sign-up needed to try

How to make a texture seamless

  1. Upload a close-up of the material

    A straight-on photo works best: camera square to the surface, the material filling the frame, soft light without hard shadows or reflections. PNG, JPG and WebP all work, and the image is processed on your computer.

  2. Pick the sample area and a mode

    Drag a box over the cleanest part of the photo. Seam joining suits stone, plaster, fabric and wood veneer; Exact copy keeps a pattern that already repeats; Floor boards rebuilds plank floors.

  3. Check the tiles, then download

    The preview repeats your tile, so a seam or a light patch shows up at once. Adjust Light balance or Join range if you need to, then download a full-size PNG or save it to your Lovspark library.

Seamless texture examples: stone, wood, fabric, brick and floors

Drag the line to compare · click to enlarge

Honed travertine

Seam joining removed the hard edges, and Light balance at 100 with a range of 1 flattened the window light that otherwise repeats as a soft grid.

Walnut veneer

The joint follows the vertical grain, so the lines run through the tile edge instead of stopping at it.

Running bond brick

Mortar lines meet across the tile edge, so a long wall reads as one surface rather than a stack of photos.

Carrara marble

Fine, evenly spread veining hides the repeat. A single bold vein would repeat visibly in any tiled texture, so sample a calm part of the slab.

Linen upholstery

Slub weave and soft wrinkles keep their texture while the darker corners of the photo are evened out.

Herringbone from a plank photo

One photo of straight oak planks rebuilt as herringbone. Board faces come from the real photo, so the grain and color variation stay.

Chevron oak floor

The same oak cut into chevron. Length ratio sets how long each board is against its width.

Basket weave parquet

Blocks of three planks alternate direction; Planks per block goes from two to five.

What the Lovspark seamless texture maker does

Compared onTypical online seamless texture toolsLovspark Seamless Texture Generator
Made forGame textures and 3D propsInterior and architectural materials
Wood grainBlends the edges the same way in every directionJoins along the grain so lines stay continuous
Uneven lightOften left in the tile and repeatedLight balance flattens falloff before joining
FloorsTiles the photo as it isRebuilds planks as herringbone, chevron, basket weave or square tiles
Where it runsVaries; some tools upload your imageIn your browser; saving to your library is optional

Who uses the seamless texture generator

How to make a seamless texture that does not look tiled

A tileable texture is only as good as the photo behind it. Here is how to shoot it, which mode to pick and how to fix the two problems that make a render look tiled.

  1. What is a seamless texture?
  2. Take a photo that will tile well
  3. Choose a processing mode
  4. Fix a soft checkerboard of light and dark
  5. Set the real-world size in your renderer

What is a seamless texture?

A seamless texture, also called a tileable texture, is an image whose left edge continues into its right edge and whose top continues into its bottom. A renderer repeats it to cover a wall or floor, and no line appears where one copy meets the next.

SketchUp, Enscape, V-Ray, D5, Twinmotion and Blender all repeat a material image this way. The size you give one tile in the material settings sets the real-world scale, so a seamless texture also needs to show a known amount of material.

Take a photo that will tile well

Most problems are decided before you open the generator.

  • Square on: Hold the camera parallel to the surface. A slanted photo has one side larger than the other, and no tool can join those edges cleanly.
  • Fill the frame: Keep the edge of the slab, the floor skirting and any objects out of the picture.
  • Soft light: Overcast daylight or a shaded window is best. Hard sun, flash and reflections on polished stone repeat as patches.
  • No standout marks: A knot, a bold vein or a stain will repeat on every tile. Sample a calm area, or shoot a larger area so the mark is small.

Choose a processing mode

The generator has three modes; the right one depends on the material.

  • Seam joining: For stone, plaster, concrete, fabric and wood veneer. It finds the best overlap, joins the edges and evens out the light.
  • Exact copy: For patterns that already repeat, such as printed wallpaper or a tile sheet you have cropped to one repeat. Pixels are kept as they are.
  • Floor boards: For plank and parquet floors. It takes board faces from the photo and lays them out as staggered, aligned, herringbone, chevron, basket weave or square tiles.

Fix a soft checkerboard of light and dark

If the tiled preview shows soft light and dark patches in a grid, the lighting of the original photo is repeating. Raise Light balance toward 100 and lower Lighting analysis range to 1.

In our tests on travertine, terrazzo, microcement, marble, linen and walnut, the automatic setting removed the hard seams but left a faint grid; Light balance 100 with a range of 1 removed it. The examples on this page use that setting.

Set the real-world size in your renderer

Measure what one tile covers before you leave the sample: a 60 cm stone tile, four planks of a 19 cm floor, or about a dozen brick courses. Enter that width in the material size field of your renderer and the texture will sit at the right scale.

For floors made in Floor boards mode, the tile width is the plank width multiplied by the number of planks across one tile.

FAQ

Seamless Texture FAQ

01/What is a seamless texture generator?

It turns an ordinary material photo into a tileable texture: an image whose edges continue into each other, so a renderer can repeat it across a surface without visible seams.

02/Is the Lovspark seamless texture generator free?

Yes, with or without an account. Processing runs in your browser and uses no credits. Without an account you can try one image; signing in is free and removes the limit, and lets you save results to your library.

03/Is my image uploaded?

No. The photo is processed on your computer. It is uploaded only when you save a result to your Lovspark library.

04/Which renderers can use the textures?

Any renderer that accepts an image texture. The download is a standard PNG, which works in SketchUp, Enscape, V-Ray, D5, Twinmotion, Blender and Unreal Engine.

05/Can it make normal, roughness or displacement maps?

No. It outputs the color image only. Use your renderer or a dedicated map tool to make the other maps from it.

06/Why does my texture still look repetitive?

A standout mark such as a knot or a bold vein repeats on every tile. Sample a calmer area or a larger one. A soft light and dark grid is the photo lighting: raise Light balance and lower Lighting analysis range.

07/Can it make herringbone or chevron floor textures?

Yes. Floor boards mode rebuilds a straight plank photo as herringbone, chevron, basket weave, square tiles, or staggered and aligned planks.

Guides and tips

More AI design skills

Browse all skills

Make your first seamless texture

Open the free generator, drop in a material photo and download a tile that repeats cleanly.

Open the free tool

27 AI design skills · 15 image and video models